OPM 4 Optical Power Meter and OLS2 DUAL Fibre Optic Source w/ Wave ID
The Noyes OLS2-DUAL & OPM4-2D Fibre Optic Power Meter may be used to measure optical power in Premises, Telco, or Broadband fibre optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature.
Multiple test Tone detection is provided for fibre identification. The OPM 4 stores optical references for each calibrated wavelength. An easy-to-read Dual Wavelength LCD with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.
In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Multimode or single-mode applications
- Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
- Wave ID – automatic wavelength identification and switching
- Passive Optical Networks (PON) testing
- Dual Wavelength testing
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
- Large LCD with Backlight
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- Battery Gauge
- N.I.S.T traceable
Included:
- AFL Noyes OLS2 Dual SM Fibre Light Source
- SM Source:
- 1310nm
- 1550nm
- FC Connector For Source
- SM Source:
- Noyes OPM 4-4D Single Mode Multimode Fibre Optic Power Meter
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 5mm Universal Connector for Meter
- Carrying Case for both units
Remarks:
- Excellent Condition – , Tested Fully Operational.
